6W RMS<\/a>.<\/p>\n\n\n\nBluetooth Version<\/strong>: The Bluetooth version is 5.0<\/p>\n\n\n\nBluetooth Range:<\/strong> The Bluetooth function effectively works up to 32 feet.<\/p>\n\n\n\nRemote Working Range<\/strong>: The remote working range is up to 16 feet. <\/p>\n\n\n\n<\/span>Accessories That You Will Get with Craig Sound Bar<\/strong><\/span><\/h2>\n\n\n\nThe Craig Sound Bar comes with some accessories. They include:<\/p>\n\n\n\n
\n- 1 unit of AC or DC adapter with an input capacity of 100-240V for AC. The frequency is 50\/60Hz operating on 0.5 amp maximum. The output capacity is 5.8 Volts functioning with 1.5 amps electric current.<\/li>\n<\/ul>\n\n\n\n
\n- 1 unit remote control with CR2025 button cell that is already included and installed.<\/li>\n<\/ul>\n\n\n\n
\n- 1 unit owner\u2019s manual<\/li>\n<\/ul>\n\n\n\n
\n- 1 unit of audio connection cable. It comes with 3.5 mm stereo plugs.<\/li>\n<\/ul>\n\n\n\n
\n- 2 units of plastic inserts<\/li>\n<\/ul>\n\n\n\n
\n- And 2 units of metallic screws to mount it on the wall.\u00a0<\/li>\n<\/ul>\n\n\n\n
<\/span>How to Connect Craig Sound Bar to The Power Source?<\/strong><\/span><\/h2>\n\n\n\nConnecting the Craig sound bar is very easy. Just insert the plug from the already supplied AC\/DC adapter into the DC In jack placed at the rear of the device.<\/p>\n\n\n\n
Now connect the adapter to the outlet. The outlet should function on AC between 100-240 Volts with frequency of 50-60 Hz. You will find a red standby indicator visible on the front part of the device. <\/p>\n\n\n\n
<\/span>2 Tips to Reduce Energy Consumption:<\/strong><\/span><\/h2>\n\n\n\n\n- If you want to save energy, you can unplug the AC or DC adaptor from the outlet.\u00a0 You can do this if you are not planning to use it for a longer period.<\/li>\n<\/ol>\n\n\n\n
\n- The adaptor should be correctly oriented on a floor or vertical mount position.<\/li>\n<\/ol>\n\n\n\n
<\/span>2 Things to Consider While Installing Craig Sound Bar<\/strong><\/span><\/h2>\n\n\n\n\n- You can install the Craig sound bar with two simple steps. If you are planning to place it on the bookshelf or television rack or enclosed spaces, make sure it has 2 to 3 inches of space around itself. Without proper space and ventilation, it will generate more heat.\u00a0<\/li>\n<\/ol>\n\n\n\n
\n- You can consult a professional for mounting it on the wall.\u00a0<\/li>\n<\/ol>\n\n\n\n
<\/span>2 Ways to Wall Mount The Craig Sound Bar<\/strong><\/span><\/h2>\n\n\n\nIf you want to mount it on the wall yourself, you can follow these simple steps.<\/p>\n\n\n\n
<\/span>Wooden Wall:<\/strong><\/span><\/h3>\n\n\n\n\n- If you want to mount it on a wooden wall, start marking the positions of the screws on it with a pencil.<\/li>\n\n\n\n
- Drill the screws into the marks. Now, leave approximately 0.3 inches of length for hooking the soundbar.<\/li>\n<\/ul>\n\n\n\n
\n- Now you can put the device onto the screws. Make sure the screws are firmly drilled in and stable.\u00a0<\/li>\n<\/ul>\n\n\n\n
<\/span>Brick Wall:<\/strong><\/span><\/h3>\n\n\n\n\n- Start by marking the positions of the screws on the brick wall with a pencil.<\/li>\n\n\n\n
- Now you need to drill two holes with a powerful drilling machine.<\/li>\n\n\n\n
- Time to insert the plastic components already provided into those holes with a hammer.\u00a0<\/li>\n\n\n\n
- Secure the screws into those plastic inserts and leave a gap of 0.3 inches to hook the device.\u00a0<\/li>\n\n\n\n
- Place the unit onto the screws and ensure they are firmly placed.\u00a0<\/li>\n<\/ul>\n\n\n\n
<\/span>How to Install Button Cell for Remote Control<\/strong><\/span><\/h2>\n\n\n\nIf you are installing the button cell for the first time, make sure you follow these steps. <\/p>\n\n\n\n
\n- First, you need to remove the insulation film.\u00a0<\/li>\n\n\n\n
- If you feel that the cell is already drained, replace it with a new cell.<\/li>\n\n\n\n
- Slightly push and slide out the existing cell from the holder.<\/li>\n\n\n\n
- Now replace it with a new CR2025 cell. Check out the polarity markings for seamless replacement.<\/li>\n\n\n\n
- It is time to close the cell hold and you are done.<\/li>\n<\/ul>\n\n\n\n
<\/span>11 Safety Tips to Protect The Battery<\/strong><\/span><\/h2>\n\n\n\nIf you want to maintain the health of the Craig sound bar, it is better to follow some precautionary measures. It will increase the battery’s health and the device\u2019s health as well. <\/p>\n\n\n\n
\n- Make sure you use only the right type and size of the battery that is specified by the manufacturer.\u00a0<\/li>\n\n\n\n
- You need to insert the cell following the right polarity only. It should rightly fit the battery compartment.\u00a0<\/li>\n\n\n\n
- Do not forget to remove a reversed one as it might damage the device.<\/li>\n\n\n\n
- Never mix different sorts of batteries together like Carbon-Zinc or Alkaline.\u00a0<\/li>\n\n\n\n
- Never leave the batteries if they are fully consumed. It might cause battery leakage in the long run.<\/li>\n\n\n\n
- Do not recharge the batteries that are not designed for charging. It can cause overheating and battery rupture.<\/li>\n\n\n\n
- Never dispose of the batteries in a fire. It might explode.<\/li>\n\n\n\n
- Clean the battery, its contacts, and the battery holder of the device with a soft cloth before inserting it.<\/li>\n\n\n\n
- If the button cell battery of the device is already swallowed, do not leave it like that inside. It might lead to internal burning in 2 hours only. The result is a dead coin\/cell battery.<\/li>\n\n\n\n
- Keep it away from the children.<\/li>\n\n\n\n
- If you find it difficult to close the battery compartment properly, do not use it.\u00a0<\/li>\n<\/ol>\n\n\n\n
<\/span>2 Reasons to Maintain The Right Distance of Remote Transmitter<\/strong><\/span><\/h2>\n\n\n\nIt is important to maintain a safe distance between the device and the remote transmitter for optimum performance. <\/p>\n\n\n\n
\n- Make sure there is no obstacle between the transmitter and the device. Otherwise, the device might not function properly.<\/li>\n\n\n\n
- Also, if any type of stronger light shines on the remote sensor, the functioning might be unstable. So, keep it away from direct sunlight or fluorescent and incandescent lamps.\u00a0<\/li>\n<\/ol>\n\n\n\n
<\/span>How to Operate Craig Sound Bar?<\/strong><\/span><\/h2>\n\n\n\nOperating the Craig sound bar is very easy.<\/p>\n\n\n\n
\n- Just connect the device to the AC power source. The red standby indicator will be clearly visible at this stage.<\/li>\n\n\n\n
- Now, long press the \u201cstandby\u201d or \u201csource\u201d button placed at the top of the device. After 2 seconds, press the power button of the remote control to power it on from the standby mode.\u00a0\u00a0<\/li>\n\n\n\n
- Now press again and release the \u2018standby\u201d or \u201csource\u201d button of the device.\u00a0<\/li>\n\n\n\n
- You can press the \u201csource\u201d button of the remote control to switch on the particular playback mode that you want.<\/li>\n\n\n\n
- You can also adjust the volume levels by pressing and releasing the \u201c+\u201d or \u201c-\u201d buttons of the device. Or press & release the VOL \u201c+\u201d or \u201c-\u201d buttons of the remote control.\u00a0\u00a0<\/li>\n\n\n\n
- To mute the device temporarily, you can press the \u201cmute\u201d button on the remote control. Press again to unmute the device.<\/li>\n\n\n\n
- If you want to disconnect the device, long press the \u201cstandby\u201d or \u201csource\u201d button of the device. Or you can press the \u201cpower\u201d button of the remote control to switch on the \u201cstandby\u201d mode.<\/li>\n\n\n\n
- Unplug the AC or DC adapter from the outlet if you are not going to use it for a long time.<\/li>\n<\/ul>\n\n\n\n
<\/span>6 Simple Tips for Bluetooth Pairing:<\/strong><\/span><\/h2>\n\n\n\n\n- Pairing the device with others via bluetooth is simple. Power in the device and enter to the Bluetooth mode. The indicator this time will blink in blue.<\/li>\n\n\n\n
- Now, it is time to power on the external bluetooth device and enter the bluetooth searching mode.\u00a0<\/li>\n\n\n\n
- Pair up the device by reading the instructions appearing on the screen of the external device. Once paired, the indicator will not blink anymore.<\/li>\n\n\n\n
- When the bluetooth external device is searching for the device, you can see the model number \u201cCHT987\u201d on the display.\u00a0<\/li>\n\n\n\n
- If you are asked to enter a code while pairing up, enter \u201c0000\u201d or \u201c1234\u201d.<\/li>\n\n\n\n
- Once you are done with the pairing, you can listen to music with the external bluetooth device.<\/li>\n<\/ol>\n\n\n\n
You can use the buttons of the remote control to pause and resume the playback. There are \u201c+\u201d and \u201c-\u201d buttons on the device and a remote control to control the volume of the music. Also, you can skip the tracks using the specific buttons of the remote control.<\/p>\n\n\n\n
<\/span>How to Operate Craig Sound Bar After The Pairing?<\/strong><\/span><\/h2>\n\n\n\n\n- Once the pairing is done, you need to power on the external bluetooth device.\u00a0<\/li>\n\n\n\n
- Enter the bluetooth mode.<\/li>\n\n\n\n
- Now, power on the device and enter bluetooth mode.<\/li>\n\n\n\n
- Wait for some time until the device is paired up with the external device.<\/li>\n\n\n\n
- After pairing up, start playing your favorite music.<\/li>\n<\/ul>\n\n\n\n
<\/span>How Do You Listen to Music on Optical In Mode with Craig Sound Bar?<\/strong><\/span><\/h2>\n\n\n\nWith Craig sound bar, you can listen to music from an external device like a video player or television. <\/p>\n\n\n\n
\n- Connect one of the ends of the Optical Connection Cable to the external device\u2019s Optical Out Jack.\u00a0<\/li>\n\n\n\n
- Now, connect the other cable end to the Optical In jack.<\/li>\n\n\n\n
- Power on the device and enter the Optical In mode. Check out the color of the indicator. It should be blue and green mixed.<\/li>\n\n\n\n
- Now, you can play the video on the television or external video player. You can also watch the television programs as well.\u00a0<\/li>\n<\/ul>\n\n\n\n
<\/span>How to Operate Craig Sound Bar\u2019s AUX In 1 Mode?<\/strong><\/span><\/h2>\n\n\n\nYou can connect the Craig soundbar to an external player like a DVD or VCR player. Let me tell you how.<\/p>\n\n\n\n
\n- Connect the RCA connection cable\u2019s one end to the AUX out jacks of the external audio or video player.\u00a0<\/li>\n\n\n\n
- Connect its other end to the AUX in 1 jack.<\/li>\n\n\n\n
- Power on the device and enter the AUX in 1 mode. The indicator should be red, blue, and green colors mixed this time.\u00a0<\/li>\n\n\n\n
- Now, play the music or video on the connected player.\u00a0<\/li>\n\n\n\n
- The volume level of the audio or video player should be high.<\/li>\n<\/ul>\n\n\n\n
<\/span>Steps to Operate Craig Sound Bar in AUX In 2<\/strong><\/span><\/h2>\n\n\n\nYou can also connect the MP3 player with the Craig sound bar as well.<\/p>\n\n\n\n